PROTOTYPING Omnivore Multipurpouse Modular Pouch

TheMedic08

Corporal ☆
May 21, 2020
65
86
28
#41
Do you have a sketch for the design?


I added a velcro strap inside so you can manage it yourself
I'm on the move right now so the sketch is kind of improvised...
I have ideas for four different inserts. All fit the full velcro field on the inside of the pouch. The Nav Insert is a foldover design with a translucent plastic for inserting a paper map. The EDC insert has two bungee straps on top of each other (red and green on the sketch)
 

Attachments

Andy Z.

Master Sergeant ☆☆☆
Staff member
Jan 17, 2018
1,129
997
240
#42
The EDC insert has two bungee straps on top of each other (red and green on the sketch)
I know the green color is the elastic strap but what's the red part for?

Is the design of the first one several pockets on it?

Is the final one same as what we did already in the pouch?
 
Likes: TheMedic08

TheMedic08

Corporal ☆
May 21, 2020
65
86
28
#43
I know the green color is the elastic strap but what's the red part for?

Is the design of the first one several pockets on it?

Is the final one same as what we did already in the pouch?
Yes, one large slit pocket in the back, two smaller ones on the front of it.

The red part is also an elastic strap, its just a bit narrower.

Yes the last one is the same. In case somebody would prefer both sides to be modular
 

TheMedic08

Corporal ☆
May 21, 2020
65
86
28
#45

Andy Z.

Master Sergeant ☆☆☆
Staff member
Jan 17, 2018
1,129
997
240
#47
Thank you for this idea. It will be more flexible for the bungee cord to be set up but I worry about if it's sturdy enough when it's tighten. Do you have any pic of some thing carryed on it?
 
Last edited:

Andy Z.

Master Sergeant ☆☆☆
Staff member
Jan 17, 2018
1,129
997
240
#50

TheMedic08

Corporal ☆
May 21, 2020
65
86
28
#56
It's completed already. But... there are some places which are not made correctly. It's returned for modifycation.
Awesome! Stoked to see how they turn out.

I would love to see some inserts made, I have some designs ready that I had already made for the admin pouch.
Really cool! Maybe there might be a way to even make them interchangable? Do you have some sketches?
 

Andy Z.

Master Sergeant ☆☆☆
Staff member
Jan 17, 2018
1,129
997
240
#58
Finally completed. We did diffierent panels for the pouch so it can be customized based on personal needs. I tested the mesh panel and it really take time to cross the plastic cord on it. I think it's a problem which need to be fixed.

module-med-pouch-01.jpg module-med-pouch-03.jpg module-med-pouch-02.jpg
 

Andy Z.

Master Sergeant ☆☆☆
Staff member
Jan 17, 2018
1,129
997
240
#60
I have worked up some insert suggestions from Onetigris products that already exist, and a AR magpouch insert, and IFAK insert that should fit this and the admin panel I tested. It could also be used behind a plate in a plate carrier or any bag with loop. Should I post it here or on another thread?
sure you can share your suggestions here if they are related.
 
Likes: TheMedic08